When specifying requires LEED / Sustainability look to Advanta Cabinets to deliver cabinetry consultations that make the process simpler and easier. We have industry-leading product options to meet any need – and the experience to know how to best apply them for the benefit of your project.
Whether you choose composite particleboard or hardwood plywood construction, all Advanta Cabinets products are CARB ATCM 93120 phase 2 and TSCA Title VI compliant. Premier construction cabinets may qualify for recycled content LEED Credits.
Further information on CARB II regulations, which were more broadly adopted as TSCA Title VI, can be found below.
The California Air Resources Board (CARB) passed the Airborne Toxic Control Measure (ATCM) in 2007 to limit the amount of formaldehyde emissions permitted in composite wood products. The guidelines cover hardwood plywood with veneer cores (HWPW-VC), hardwood plywood with composite cores (HWPW-CC), particleboard (PB), medium density fiberboard (MDF) and thin MDF (tMDF) and apply to panel manufacturers, distributers, importers, fabricators, and retailers of the covered composite wood products, and finished good containing said products, which are sold to customers in California. The standards were released in two phases, with final emission limits in place as of July 2012, as outlined below.
Any company that is “CARB II” or “CARB” compliant meets the July 2012 standards. The CARB ATCM rules require CARB compliant products to be labeled as such, either on the products or the packaging for finish goods. All Echelon Cabinetry packaging labels carry a notification that the product provided is “California 93120 Compliant for Formaldehyde Phase II”, in accordance with ATCM regulations.
In addition to the CARB standards outlined in the above table, the ATCM also provided special provisions for NAF and ULEF suppliers of hardwood plywood, particleboard, and medium density fiberboard. NAF based resins are “formulated with no added formaldehyde as part of the resin cross linking structure, and include resins made from soy, polyvinyl acetate, or methylene diisocyanate,” while ULEF resins are “formaldehyde containing resins formulated such that the formaldehyde emissions from composite wood products are consistently below applicable Phase 2 emission standards.”[ii]
ATCM sections 93120.3(c) and 93120.3(d) set forth guidelines for NAF and ULEF compliant products. Products that meet the required emissions levels and the ATCM third party certification requirements can apply for an exemption from CARB ATCM regulations.
产品必须被测试和认证的碳水化合物approved third party certifier and must include three months of routine quality control testing data, among other testing requirements. “Ninety percent of the three months of routine quality control testing data and the results of the one primary or secondary method test must be shown to be no higher than 0.04 ppm. In addition, all data must be shown to be no higher than 0.05 ppm for HWPW and 0.06 ppm for PB, MDF, and thin MDF” (ATCM 93120.3(c)).[iii] NAF products are often marketed as “formaldehyde-free.”
Emissions caps for ULEF resin products are outlined in the table below, as provided in ATCM 93120.3(d).[iv]
NAUF products do not use urea-formaldehyde resins in the making of the board. Rather, they use phenol formaldehyde as a resin, which is designed to restrict the formaldehyde from off-gassing. CARB ATCM does not address NAUF. LEED v.4 also switches focus from NAUF to CARB NAF and ULEF compliant products.
再保险gardless of which production method you elect to use on your project, wood itself naturally contains formaldehyde so there will be some amount of formaldehyde in any board, the emissions of which will fall below any emissions regulations.
When CARB first launched the ATCM standards in 2009, it was the most stringent formaldehyde emissions standards in the US. At the time, there were no national standards in place for formaldehyde in composite wood products. However, in 2010 the Formaldehyde Standards for Composite Wood Products Act, or Title VI of the Toxic Substances Control Act (TSCA) was signed into law. The EPA is currently finalizing rules that will set limits on formaldehyde emissions from composite wood products, both domestic and imported, that are sold or supplied to customers in the United States. The current proposed rules would mirror the limits already in place under CARB ATCM regulations.[v] The most recent update from the EPA indicates final rules is projected to be published in The Federal Register in September, 2015.[vi]
http://www.arb.ca.gov/toxics/compwood/factsheet.pdf (chart and content)
[iv] Ibid (chart and content)
再保险sources to help you create stylish and functional high-quality kitchens and baths.betway体育投注
100% dedicated and tailored to multifamily